นวัตกรรมงานฉีดแก๊ส Gas Assist Injection Molding

ระบบของกระบวนการฉีดแก๊ส Gas Assist Injection Molding

งานฉีดแก๊ส Gas Assist Injection

แหล่งที่มาของแก๊สไนโตรเจน : เครื่องผลิตแก๊สไนโตรเจน

The INMATEC PNC nitrogen technology produces nitrogen with a purity of up to 5.0 / 10 ppm (residual oxygen) and in quantities of 10,7 – 2.849,6 Nm3/h.

The INMATEC Pressure Swing Adsorption Process separates the nitrogen molecules from the oxygen molecules. You can now use high-purity N2 in a wide range of applications.

Latest Flow Technique and Innovative Rotator Engineering are reducing the demand of compressed air and lowering energy costs significantly.

The process optimizes the cycle times in the N2 production. In combination with compressors with optimized rotational speed the compressors air demand can also be significantly lowered.


เครื่องอัดอากาศ แรงดันสูง สำหรับแก๊สไนโตรเจน
งานฉีดแก๊ส Gas Assist Injection

Lenhardt & Wagner is one of the leading and renowned companies in the market of high-pressure applications. A worldwide network of L&W agencies and service centres ensures a steady growth of the company.

SpecificationLW 450 ESN
TypeAir cooled piston compressor
Capacity [liter/min] / [Nm3/h] / [cfm]450 / 27.0 / 15.9
Max. Pressure [bar]350
RPM [1/min]1100
No. of cylinders / No. of stages3/3
Prime mover typeE-Motor / 400V / 3 Phase / 50 Hz
Drive power [kW]11.0
Lubrication typeOil pump
Oil capacity [liter]2.7
Oil pressure [bar]1.5 (+/-0.2)
Noise level (measured at 1 m) [dB]64


ถังบรรจุแก๊สไนโตรเจนแรงดันสูง

Storage tanks are frequently used to provide extra filling capacity during peak periods. Ideally the storage pressure should be higher than the filling pressure, 300 bar storage systems are the most common. The storage systems can be used with most compressors and are best suited for automatic operation (e.g. ECC or auto start option). A full range of storage modules each can be combined with other modules for individual configuration.

Specification
– Steel tanks 10 year hydro test, powder coated in accordance with EN 1089/3
– Working pressure: 200, 300, 350 or 420 bar
– Sturdy steel frame, powder coated in RAL 6026
– Standard volume 50 litre
– Connected according to customer’s specifications
– Modular construction to accomodate future expansions


ตู้ควบคุมสำหรับงานฉีดแก๊ส (Gas Assist Controller)
งานฉีดแก๊ส Gas Assist Injection

“JST developed” Nitrogen Gas Assist Controller
Synchronize with Injection Molding Machines for control high pressure nitrogen gas to inject nitrogen into the mold.

Specification
– 5 Step setting with pressure, timer, speed.
– Delay time and auto purge setting.
– Inlet / outlet pressure WP 350 bar.
– Safety valve 355 bar.
– Inlet / outlet pressure gauge monitoring.
– Inlet / outlet ports 1/4″FNPT
– Monitoring outlet pressure by graph display.
– Power supply 230VAC, 1Phase, 50/60Hz.



ติดตามข่าวสารอื่นๆได้ที่ JST Facebook Fanpage

เราใช้คุกกี้เพื่อพัฒนาประสิทธิภาพ และประสบการณ์ที่ดีในการใช้เว็บไซต์ของคุณ คุณสามารถศึกษารายละเอียดได้ที่ นโยบายความเป็นส่วนตัว และสามารถจัดการความเป็นส่วนตัวเองได้ของคุณได้เองโดยคลิกที่ ตั้งค่า

ตั้งค่าความเป็นส่วนตัว

คุณสามารถเลือกการตั้งค่าคุกกี้โดยเปิด/ปิด คุกกี้ในแต่ละประเภทได้ตามความต้องการ ยกเว้น คุกกี้ที่จำเป็น

ยอมรับทั้งหมด
จัดการความเป็นส่วนตัว
  • คุกกี้ที่จำเป็น
    เปิดใช้งานตลอด

    ประเภทของคุกกี้มีความจำเป็นสำหรับการทำงานของเว็บไซต์ เพื่อให้คุณสามารถใช้ได้อย่างเป็นปกติ และเข้าชมเว็บไซต์ คุณไม่สามารถปิดการทำงานของคุกกี้นี้ในระบบเว็บไซต์ของเราได้

  • คุกกี้เพื่อการวิเคราะห์

    คุกกี้ประเภทนี้จะทำการเก็บข้อมูลการใช้งานเว็ปไซต์ของคุณ เพื่อประโยชน์ในการวัดผล ปรับปรุง และพัฒนาประสบการณ์ที่ดีในการใช้งานเว็ปไซต์ ถ้าหากท่านไม่ยินยอมให้เราใช้คุกกี้นี้ เราจะไม่สามารถวัดผล ปรับปรุง และพัฒนาเว็ปไซต์ได้

บันทึกการตั้งค่า
thTH