Products > SHINI > โซลูชั่น SHINI > PET Preform System

TH / EN

ระบบสำหรับ PET Preform (PET Preform System)

In PET preform system, drying becomes the most critical step which must be seriously taken and the moisture in the material must be removed at a reasonable temperature. Shini dehumidifying dryer can provide dew-point of -40℃ or even lower. Also it can achieve constant detection of all the parameters and stabilize the dew-point.

Based on its technology strength and experience in auxiliary equipment field, Shini can meet various kinds of demands from plastics conveying, dehumidifying and drying; mould heating and cooling; regrinds recycling to color management. Adopt intelligent energy-saving control technology to monitor the material processing, Shini can provide different solutions according to different requirements from the customers.

ระบบลำเลียงและป้อนเม็ดพลาสติก

 ทุกส่วนที่สัมผัสกับวัตถุดิบพลาสติกนั้นทำจากสแตนเลสเพื่อให้มั่นใจว่าจะไม่มีการปนเปื้อนระหว่างการลำเลียงวัตถุดิบ
 การปรับความเร็วของการลำเลียงและการเพิ่มปริมาณลมในระบบที่ยืดหยุ่นได้นั้น ช่วยให้สามารถหลีกเลี่ยงปัญหาฝุ่นที่เกิดจากการลำเลียง
 สำหรับวัตถุดิบที่มีอุณหภูมิสูงนั้น มีการออกแบบพิเศษที่มาพร้อมกับฟังก์ชั่นระบายความร้อนด้วยน้ำ (water-cooling function) ที่ช่วยลดความเสี่ยงจากการลำเลียงวัตถุดิบที่มีอุณหภูมิสูง
 Closed loop of two-stage conveying system. For the conveying of materials to the hopper on injection molding machine, Shini can greatly reduce the heat dissipation and the risk of material rewetting.

ระบบอบเม็ดพลาสติก

ในกระบวนการทำ preform PETในกระบวนการขึ้นรูปพลาสติกนั้น การอบเม็ดพลาสติกเป็นขั้นตอนที่จำเป็นและถูกให้ความสำคัญในการดึงความชื้นออกจากเม็ดพลาสติกด้วยอุณหภูมิความร้อนระดับต่างๆ เครื่องไล่ความชื้นของ SHINI สามารถทำ dew-point ได้ที่-40℃ หรือต่ำกว่านั้น นอกจากนี้ยังสามารถตรวจจับค่าพารามิเตอร์ทั้งหมดและควบคุมให้ค่า dew-point คงที่

ระบบควบคุมสี

อุปกรณ์รุ่น SCM ของ SHINI เหมาะสำหรับตวงมาสเตอร์แบท (masterbatch) โดยปริมาณทำงานอยู่ที่ 0.2-32 กิโลกรัมต่อชั่วโมง หากต้องการสัดส่วนในการผสมที่แม่นยำมากขึ้น สามารถเลือกใช้รุ่น SGD ซึ่งมีการคำนวณ loss-in-weight โดยปริมาณทำงานอยู่ที่ 0.04-32 กิโลกรัมต่อชั่วโมง
The inner cooling water system can prevent masterbatch from falling into the PET main stream and melting. Thus ensures accurate dosage. Molding cycles of adding masterbatch can be set to meet the requirements of micro weight measuring.

การ Crystallize PET

Shini PET crystallizer is specially designed for the homogeneous crystallization as well overcoming glass transition temperature. Also it can avoid material bonding and bridging. With models from SCR-160U to SCR-1600U, the hopper capacity ranges from 160 to 1,600 liters.
The material level switch can help adjust the running mode of both the crystallizer and the feeding device based on the actual material level it detects. Adopt accurate temperature detection system and rotary valve equipped at the material discharge port to ensure constant crystallization and avoid material degradation.

Gravimetric Blender

With gravimetric sensor and material level switch, the special gravimetric blender designed for high temperature material is suitable for PET crystallized materials.
Ethernet interface attached to the controller works together with the relevant software, material proportion data (max. output, actual output, proportioning accuracy) can be transmitted to control product quality. Recalibration will be automatically started after each weighing to ensure optimal proportion accuracy. Regrinds auto compensation function available. Aberration compensation can be automatically calculated based on the discharge amount of material.
Special bridge-breaking structure and discharge way are used to meet all the requirement of sheet material dosing and at the same time ensure the continuity of the operation.

Mould Sweat Dehumidifying System

When mould surface temperature is lower than the surrounding air dew-point temperature, dew will emerge. The formation of dew will not only lead to poor product quality and reduction of productivity, also the mould surface can be corroded in succession pollute the environment. Shini mould dehumidifier can effectively solve the problem and ensure stable molding condition and maximum production capability of PET system.

ระบบทำความเย็น

ชิลเลอร์ของ SHINI สามารถควบคุมอุณหภูมิ, อัตราการไหลของน้ำ และแรงดันของน้ำได้อย่างแม่นยำ โดยมีเครื่องชิลเลอร์ 2 แบบคือ แบบระบายความร้อนด้วยน้ำ และแบบระบายความร้อนด้วยลม นอกจากนี้ยังมีอุปกรณ์อื่นๆสำหรับระบบทำความเย็นอีก เช่น cooling tower, ปั๊ม และถังน้ำ SHINIมีโซลูชั่นที่หลากหลายเพื่อรองรับความต้องการในรูปแบบต่างๆที่แตกต่างกันออกไปด้วยอุปกรณ์และเทคโนโลยีต่างๆ

On-line PET Water Ratio Detection

In PET molding production, water contains play a very important role in the production. To ensure high quality, the water ratio of the PET material must be controlled within the range permitted. AQU 100 water contain tester is dedicated to detect PET material.

เราใช้คุกกี้เพื่อพัฒนาประสิทธิภาพ และประสบการณ์ที่ดีในการใช้เว็บไซต์ของคุณ คุณสามารถศึกษารายละเอียดได้ที่ นโยบายความเป็นส่วนตัว และสามารถจัดการความเป็นส่วนตัวเองได้ของคุณได้เองโดยคลิกที่ ตั้งค่า

ตั้งค่าความเป็นส่วนตัว

คุณสามารถเลือกการตั้งค่าคุกกี้โดยเปิด/ปิด คุกกี้ในแต่ละประเภทได้ตามความต้องการ ยกเว้น คุกกี้ที่จำเป็น

ยอมรับทั้งหมด
จัดการความเป็นส่วนตัว
  • คุกกี้ที่จำเป็น
    เปิดใช้งานตลอด

    ประเภทของคุกกี้มีความจำเป็นสำหรับการทำงานของเว็บไซต์ เพื่อให้คุณสามารถใช้ได้อย่างเป็นปกติ และเข้าชมเว็บไซต์ คุณไม่สามารถปิดการทำงานของคุกกี้นี้ในระบบเว็บไซต์ของเราได้

  • คุกกี้เพื่อการวิเคราะห์

    คุกกี้ประเภทนี้จะทำการเก็บข้อมูลการใช้งานเว็ปไซต์ของคุณ เพื่อประโยชน์ในการวัดผล ปรับปรุง และพัฒนาประสบการณ์ที่ดีในการใช้งานเว็ปไซต์ ถ้าหากท่านไม่ยินยอมให้เราใช้คุกกี้นี้ เราจะไม่สามารถวัดผล ปรับปรุง และพัฒนาเว็ปไซต์ได้

บันทึกการตั้งค่า
en_USEN