Gas Assist Injection Molding Technology
Gas Assist Injection Molding System
แหล่งที่มาของแก๊สไนโตรเจน : เครื่องผลิตแก๊สไนโตรเจน
The INMATEC PNC nitrogen technology produces nitrogen with a purity of up to 5.0 / 10 ppm (residual oxygen) and in quantities of 10,7 – 2.849,6 Nm3/h.
The INMATEC Pressure Swing Adsorption Process separates the nitrogen molecules from the oxygen molecules. You can now use high-purity N2 in a wide range of applications.
Latest Flow Technique and Innovative Rotator Engineering are reducing the demand of compressed air and lowering energy costs significantly.
The process optimizes the cycle times in the N2 production. In combination with compressors with optimized rotational speed the compressors air demand can also be significantly lowered.
เครื่องอัดอากาศ แรงดันสูง สำหรับแก๊สไนโตรเจน
Lenhardt & Wagner is one of the leading and renowned companies in the market of high-pressure applications. A worldwide network of L&W agencies and service centres ensures a steady growth of the company.
|Specification||LW 450 ESN|
|Type||Air cooled piston compressor|
|Capacity [liter/min] / [Nm3/h] / [cfm]||450 / 27.0 / 15.9|
|Max. Pressure [bar]||350|
|No. of cylinders / No. of stages||3/3|
|Prime mover type||E-Motor / 400V / 3 Phase / 50 Hz|
|Drive power [kW]||11.0|
|Lubrication type||Oil pump|
|Oil capacity [liter]||2.7|
|Oil pressure [bar]||1.5 (+/-0.2)|
|Noise level (measured at 1 m) [dB]||64|
Storage tanks are frequently used to provide extra filling capacity during peak periods. Ideally the storage pressure should be higher than the filling pressure, 300 bar storage systems are the most common. The storage systems can be used with most compressors and are best suited for automatic operation (e.g. ECC or auto start option). A full range of storage modules each can be combined with other modules for individual configuration.
– Steel tanks 10 year hydro test, powder coated in accordance with EN 1089/3
– Working pressure: 200, 300, 350 or 420 bar
– Sturdy steel frame, powder coated in RAL 6026
– Standard volume 50 litre
– Connected according to customer’s specifications
– Modular construction to accomodate future expansions
Gas Assist Controller
“JST developed” Nitrogen Gas Assist Controller
Synchronize with Injection Molding Machines for control high pressure nitrogen gas to inject nitrogen into the mold.
– 5 Step setting with pressure, timer, speed.
– Delay time and auto purge setting.
– Inlet / outlet pressure WP 350 bar.
– Safety valve 355 bar.
– Inlet / outlet pressure gauge monitoring.
– Inlet / outlet ports 1/4″FNPT
– Monitoring outlet pressure by graph display.
– Power supply 230VAC, 1Phase, 50/60Hz.
Follow news & update from JST Facebook Fanpage